News CenterCurrent Location：Home > News Center

MCGILL overloading CAM follower bearing

Release Time： 2016/3/14 Hits：1261

1 inch to 6 inches and fell 35 mm to 90 mm in diameter

Cylinder or drum diameter

Custom design

Screwdriver slot or six square hole (only metric series)

Standard, eccentric bolt or retaining ring roller

Custom grease

Double row cylindrical roller, to achieve a higher rated radial load and side thrust.

The bearing steel

Thick wall outer ring designed to withstand the impact of the CAM follower operating load

Only on the surface of the roller path and flange inner bolt after heat treatment. The remaining parts of the bolt without hardening treatment, so I have enough toughness nodular cast iron material.

All external help black oxide on the surface of a coating corrosion resistance

Inch series heavy duty CAMROL ® bearing with large oil box design and introverted rubber lip. These functions for the standard configuration, reduce the maintenance work.

Metric units series heavy duty CAMROL ® bearing integrates metal mask, helps to protect bearings and grease stranded

Tolerance can be up to 2 inches unit design of thread level. Metric thread under 6 g tolerance design. Metric units provide two lock nut stud type, easy to install

Lithium bearing factory has been using soap grease for lubrication

To provide a standard size and can design according to the custom

Previous：NACHI new series automatic self-aligning roller bearing on the market

Next：INA bearing FAG bearing product window rolling bearing and sliding bearing